Energy Savings with a Motion Sensor: Get More Efficiency from Your LED Floodlight

Have you recently installed an LED floodlight at a warehouse, walkway or loading zone? Then you’re already saving significantly on energy thanks to the low consumption and high efficiency of LED technology. Yet you can easily increase those savings even further. By adding a motion sensor, your floodlight only operates when needed — ideal for areas where lighting doesn’t need to burn continuously.

Why use a motion sensor with an LED floodlight?

Many companies leave outdoor lighting or floodlights on for far too long. Think of parking areas, technical rooms or rear premises. A floodlight with a sensor switches on automatically as soon as movement is detected. This provides instant energy savings without compromising safety or visibility.

A well-adjusted sensor ensures:

● Up to 50% additional energy savings because the light only operates during activity.

● Longer lifespan of your LED floodlight, as it runs fewer hours.

● Increased safety around buildings thanks to immediate illumination upon detection.

How to set up the motion sensor efficiently

A motion sensor offers three basic settings that determine how smart your floodlight operates:

1. Detection distance

Define how far the sensor should “see”. For loading areas, 8–10 metres is common; for larger sites, 12–15 metres.

2. Lighting duration

This is the time your LED floodlight remains on after detecting movement. Guideline: 30–120 seconds — short enough to save energy, long enough for safe passage.

3. LUX setting

This determines light sensitivity. If you only want the LED floodlight to switch on during the evening, set the sensor to a lower lux value.

Practical tip: always test the settings during dusk to see how the sensor reacts under realistic conditions.

With a motion sensor, you achieve greater efficiency from any LED floodlight. You reduce energy consumption, extend the lifespan and improve safety around your building. Whether optimising an existing installation or adding a new LED floodlight, a smart sensor is a small investment with immediate visible impact.

If you’d like advice on the right configuration or suitable replacement products, our specialists are happy to assist.