White Surface-mounted Motion Sensor 180° With Dusk to dawn Switch 12M Range Max. 600W IP65

The white surface-mounted Motion Sensor 180° With Dusk to dawn Switch has an IP value of 65 and is therefore perfect for indoor and outdoor use. The motion sensor is made of plastic and has a white colour. This means the motion sensor will match your white ceiling perfectly. You can connect the sensor with light bulbs up to max. 1200 Watt and LED lamps up to max. 600 Watt.

Dusk to dawn switch

The Dusk to dawn switch ensures that you can adjust the ambient light. It is possible to set the motion detector to Lux level. This allows you to set when the surface-mounted motion sensor becomes active. The motion sensor can be set to only turn on in the dark or to also work during the day.

The Dusk to dawn switch also ensures that you can choose the lighting time yourself. It is therefore possible to set the motion sensor surface to determine how long the LED lighting should remain on. The operation time can be set from a minimum of 10 seconds to a maximum of 15 minutes.

Installation of motion sensor

Installing the sensor is quickly done using the supplied screws and plugs. This motion sensor has a detection zone of up to 12 meters. This is at a recommended height of +- 2 meters and is measured by an infrared sensor (PIR sensor) at an angle of 360°. As soon as movement is detected within the detection zone, the connected lighting will immediately switch on.