Z-Wave Smart LED Recessed Dimmer 0-250 Watt - Trailing Edge

Z-Wave Smart LED Dimmer Built-in 0-250 Watt – Phase Cut

Create the perfect atmosphere at home with this Smart LED dimmer. From bright task lighting to cosy ambient lighting, the Smart LED dimmer makes it all possible, and all remotely.

With this Z-Wave Smart LED Dimmer, it is possible to dim standard LED bulbs via smartphone, manually, or through the Z-Wave home automation system.

Using the app, you connect the Smart LED dimmer to the internet. Afterwards, you can import it to Google Home or Alexa. You can set timers and choose lighting schedules. Voice control is also supported (via Google Assistant/Amazon Alexa). In the app, you can give the dimmer a name, for example 'bedroom dimmer'. You can then use this name with your voice when communicating with Alexa or Google to control the dimmer.

Finally, for optimal use, the Smart LED dimmer must always be connected to the internet. So please consider the WiFi strength in the locations where the smart LED dimmer is installed.

With this Z-Wave dimmer from EcoDim, you can effortlessly dim all different LED bulbs from 0 to 100%. This dimmer is suitable for switching and dimming dimmable 230V bulbs (max. 250W), incandescent bulbs (max. 300W), low-voltage bulbs with dimmable electronic transformers (max. 300W), and HV halogen bulbs (max. 300W). This LED built-in dimmer is a phase cut dimmer (trailing edge). This means it does not use an interference suppression coil but built-in electronics, so you won’t experience any buzzing noise. The smart LED dimmer dims your LED bulbs (operating on phase cut) completely silently. The Z-Wave dimmer has a wide range of no less than 0-250W. This means you can connect even a single dimmable 1W LED bulb to the dimmer.

This Smart LED Dimmer has the following specifications:

• Z-Wave certified
• Compatible with all Z-Wave home automation systems
• Voice control support (via Google Assistant/Amazon Alexa)
• 0-250W LED power
• Compatible with all major brand cover plates
• Optimal dimmability & light stability
• MIN adjustment
• Overload & interference protection
• Suitable for 90% of all dimmable LED bulbs
• Installation with existing 2 wires (no neutral wire required)
• Silent dimming
• Soft-start system
• Supplied including accessories
• External dimensions: 70 x 70 x 26mm

Compatible with the following Apps:

• Google Assistant/Home (via Z-Wave hub)
• Homey
• Futurehome
• FIBARO
• homee
• WINK

Compatible with the following cover frames:

• Berker by Hager
• Busch-Jaeger
• Gira
• Kopp
• Merten by Schneider
• Niko
• PEHA

Suitable for the following bulbs:

• 230V LED bulbs* (max. 250W)
• Incandescent bulbs (max. 300W)
• 230V Halogen bulbs (max. 300W)
• Low-voltage bulbs with electronic transformer/RC, such as LED bulbs with transformer (max. 300W)