Looking for a 30x120 LED Panel Light? Then you've come to the right place at Lightexpert.co.uk! We offer a wide range of professional 30x120 LED panels with various colour temperatures. Additionally, all the LED panels in this range come with an IP20 rating, meaning they are dustproof and therefore suitable for use in warehouses or car parks.

Below, you can read about the benefits and differences in LED panel lighting.

Saving on Your Energy Bill

Since a LED panel light typically operates for long, continuous hours, it's wise to choose an energy-efficient LED panel. The 30x120 LED panels in this category have lower energy consumption (wattage) compared to older light panels. As a result, you can recover your investment in the 30x120 LED panel within approximately two years. Despite the low energy consumption, the LED panels in this category offer high light output, allowing you to illuminate large spaces in an environmentally friendly way.

Easy to Install

In addition, LED panel lighting is easy to install. These 30x120 LED panels are highly suitable for recessed installation. If you have a suspended ceiling, the LED ceiling panel can be easily mounted into the ceiling. It’s also possible to mount the 30x120 LED panel against the ceiling, for example, if the ceiling is made of concrete. For this, you will need a 30x120 LED panel surface mounting system from Lightexpert.co.uk.

What Should You Consider?

Given the wide range of LED panel lights available at Lightexpert.co.uk, it's important to know what to consider. Firstly, the 30x120 LED panel comes in different colour temperatures. A LED ceiling panel with a colour temperature of 3000K (Kelvin) provides warm, natural light. A 4000K 30x120 LED panel offers natural daylight, while 6000K, for example, gives white light. Depending on your needs, the colour temperature is a crucial factor.

Additionally, there are also dimmable LED panels that allow you to adjust the light output to the desired level. Dimmable LED panel lights are ideal for offices, where the LED panel lighting doesn’t always need to be at 100%.